Confluence Retirement

In an effort to consolidate USGS hosted Wikis, myUSGS’ Confluence service is scheduled for retirement on January 27th, 2023. The official USGS Wiki and collaboration space is now SharePoint. Please migrate existing spaces and content to the SharePoint platform and remove it from Confluence at your earliest convenience. If you need any additional information or have any concerns about this change, please contact myusgs@usgs.gov. Thank you for your prompt attention to this matter.
Child pages
  • WRRI - National Competitive

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Project Owner: Gail Montgomery

Table of Contents

Browser Requirements

Browsers currently supported:

  • Google Chrome.
  • Mozilla Firefox.
  • Internet Explorer v11 or later.

Registration

To gain access to IPETT you need to register one of the following:

Department of Interior Employee 

Department of Interior employees can log in to IPETT with their Active Directory credentials. Access to IPETT should be sent to you in the first correspondence or send request to ipettsupport@sciencebase.gov.

Non- DOI (Department of Interior Employee) 

  • Must be sponsored by a USGS employee and have an Active Directory account for access to IPETT. Access to IPETT should be sent to you in the first correspondence or send request to ipettsupport@sciencebase.gov.
  • Here are instructions on how to sign up for an Active Directory account:
    • Go to https://my.usgs.gov/resources. In the Identity Management section, click on "Sign Up".
    • Enter an email address and a CAPTCHA.  
    • You will then receive a registration email with a link to follow to enter your email address, first and last name, and the email of your USGS sponsor.  
    • Once you submit the registration, an email will be sent to the sponsor to verify registration.  
    • After the sponsor verifies the registration, you will receive an email from myUSGS with a username and password.  

Anchor
Logging in
Logging in

Logging In

DOI Users

  • Please use your Department of Interior email address and your Active Directory (AD) password.

Non-DOI Users

  • Please use your my.usgs.gov username (the public email address you registered in the Registration steps) and password.
  • Click Login.

Forgotten Passwords

  • DOI Users 

    • If you forget your password contact the USGS Service Desk at 703-648-HELP (4357).
      or
    • You can use the USGS Service Desk Web Page as well. (Requires USGS intranet access

RFP (Request for Proposals) Setup

Once you are logged in to IPETT the house icon in the navigation bar will take you back to the main landing page where you will have access to RFP list, New RFP, Proposal List, New Proposal, Proposal Review List, Criteria, Institutions, all Contacts, Principal Investigators and Reviewers.

Criteria, Institutions, all Contacts, Principal Investigators and Reviewers should all be added in detail before starting an RFP or proposal. All of these areas are drop down selections within the setup RFP and Proposal forms. You find them under the Manage section of the landing page https://www.sciencebase.usgs.gov/ipett/.

Anchor
Contact
Contact

Adding a New Contact, PI and Reviewer

Note: All fields that are required are indicated by *.

...

  • Click all Contacts:.
  • On the Contact List page in the navigation bar click + New Contact.
  • Select the Type: Contact, PI, or Reviewer.
  • Enter contact Email.
    Note: Entering a known email address will automatically populate the fields.
    Or
  • Fill in desired Contact Name.
  • Fill in desired Contact Organization.
  • Fill in desired Contact Title.
  • Fill in desired Contact Phone.

Adding a New Principal Investigator

On the home page under Manage

...

  • Click Principal Investigators.
  • On the Contact List page in the navigation bar click + New PI.
  • Enter contact Email.
    Note: Entering a known email address will automatically populate the fields.
    Or
  • Fill in desired Contact Name.
  • Fill in desired Contact Organization.
  • Fill in desired Contact Title.
  • Fill in desired Contact Phone.

Adding a New Institution

On the home page under Manage

...

  • Click Institutions.
  • On the Institutions List page in the navigation bar click + New Institution.
  • Fill in desired Institution Name.
  • Fill in desired Institution Short Name.
  • Fill in desired Institution State Code.
  • Click Create.

Anchor
criteria
criteria

Adding a New Criteria

On the home page under Manage

...

  • Click Criteria.
  • On the Criteria List page in the navigation bar click + New Criteria.
  • Fill in desired criteria Name.
  • Click Create.
    Note: On the Criteria page you will want to add Criterion. You can add as many criterion as you need. These will show up in both the individual review as well as the group/panel review.
  • Click +Add Criterion.
  • Select a Type.
    Note: You will add the type you wish to see in the review process.
    • Score - is an input from 0 (lowest) to 10 (highest) rating scale for each criterion 
      10 indicates that the proposal is fully satisfied and 0 indicates that the proposal did not satisfy the benchmark.
      Note: this score will indicate the amount of funding in the Final Funding Decision.
    • Comment - enter up to 3 Proposal Strengths and 3 Proposal Weaknesses in the dialog boxes provided
      Short but descriptive responses in bullet form are acceptable and appreciated.
    • Rating Scale – This will display as stars and is an overall rating using the scale of 1=Poor to 5=Excellent.
    • Approval Scale - This will display as a heat signature and is an overall rating using the scale of 1=Poor to 5=Excellent.
    • Fill in a Name and Description (if desired).

Reviewers List

On the home page under Manage

...

Note: You can only view Reviewers List. To add reviewers, add through all Contacts.

Viewing and Editing an Existing Contact

  • Click all Contacts:.
  • On the Contact List page sort or select the contact you wish to Edit or view.
  • Select the contact. You will be taken to their view page.
  • Click Edit to modify contact.
  • Enter contact Email.
    Note: Entering a known email address will automatically populate the fields.
    Or
  • Fill in desired Contact Name.
  • Fill in desired Contact Organization.
  • Fill in desired Contact Title.
  • Fill in desired Contact Phone.

 

Creating an RFP (Request for Proposals)

  • Click +New RFP.
    Note: All fields that are required are indicated by *.
  • Select a grant Type from the drop down.
  • Enter a Fiscal Year.
    Note: Use the 4 digit year XXXX.
  • The RFP Stage is moved through the work flow using the buttons at the bottom of the RFP.
    The first stage will start at Setup.
    Note: Once you have moved past a stage you can open the RFP and change the Stage back to one you may have moved past.
  • Enter the Budget that you will be working with.
  • Select a Criteria from the drop down list. (See Adding a new criteria: to add to the list).
  • Select all the Reviewers that will be reviewing the proposals. (See Adding a new contact, PI and Reviewer: to add to the list).
  • Click Create to save your entries.
  • Click Cancel to delete all entries and go back to your previous screen.
  • After the RFP is created you will click Open Proposal Submissions in order to add proposals.
  • Click OK to move this RFP to the next Stage to allow Proposal Submissions.

 

Editing an RFP

  • Once you have created your RFP you may edit the RFP at Setup, Proposal Submissions, Submissions Verification, Individual Review, Review Verification, Group Review and Admin Review stages.
    Once an RFP is in Projects Live, Closed ■ or Cancelled ■ you will not be able to edit, you will only be able to view the RFP.
    You may also delete the RFP from the show page.

WARNING: This will delete all Proposals/Projects associated with this RFP! 

To Edit the RFP

  • From the home page click RFP List in the navigation bar. 
  • You can filter by Type, Fiscal Year, Stage and Criteria.
  • Click on the RFP Type or Fiscal Year to access your RFP.

To Delete the RFP

  • Click Delete

WARNING: This will delete all Proposals/Projects associated with this RFP!

  • You will receive a pop up, click OK to confirm or click Cancel to stop the deletion of the RFP.

To Make Changes

  • Click Edit.
  • Click Update to save changes.
  • Changes will be lost when you click Cancel.

RFP Stages

Note: The stages are in sequential order. Each stage must have the previous stage completed to move on. Access though RFP list and specific RFP you are moving.

...

  • From the RFP show page click Delete.
  • Click OK when you are sure.
  • This can be done at any RFP stage.

Adding a Proposal to an RFP

To access the Create Proposal digital form there are two ways:

...

Note: All fields that are required are indicated by *.

Adding Expected Deliverables to a Proposal

  • From the home page click Proposal List in the navigation bar. 
  • You can filter by RFP, Stage, Applicant and Panel Category.
  • Click on the Proposal Title you wish to edit.
  • Once on the Proposal show page click Edit.
  • Click + Add Deliverable.

...

  • Select a Type from the drop down.
  • Fill in desired Name.  
  • Fill in desired Description.
  • Check if you have an Example.
  • Fill in desired Due Date or leave empty to default to Proposal End Date.

Editing a Proposal

  • From the home page click Proposal List in the navigation bar. 
  • You can filter by RFP, Stage, Applicant and Panel Category.
  • Click on the Proposal Title you wish to edit.
  • Once on the Proposal show page click Edit.

Reviewing Proposals

Individual Review

  • All Proposals need to be registered or canceled.
  • The RFP stage will be placed into Individual Review. (See stages Individual Review)
  • Notifications are sent to Reviewers notifying them of proposals to review.
  • Log in as a Reviewer. (See Logging In)
  • 1 - From the Home page find Click to access all your Reviews.
  • Click Reviews.
    Or
  • 2 - From the Home page click Proposal Review List.
  • On the Review Proposal List select the proposal name in the Review Proposal column.
  • Click Download to access all documents.
  • Click Edit.
  • Add your comments and scores.
    • Score - is an input from 0 (lowest) to 10 (highest) rating scale for each criterion 
      10 indicates that the proposal is fully satisfied and 0 indicates that the proposal did not satisfy the benchmark.
      Note: This score will indicate the amount of suggested funding in the Final Funding Decision. 10=100%
    • Comment - enter up to 3 Proposal Strengths and 3 Proposal Weaknesses in the dialog boxes provided
      Short but descriptive responses in bullet form are acceptable and appreciated.
    • Rating Scale – This will display as stars and is an overall rating using the scale of 1=Poor to 5=Excellent.
    • Approval Scale - This will display as a heat signature and is an overall rating using the scale of 1=Poor to 5=Excellent.

Group Review

  • All Individual Reviews are completed and verified.
  • The RFP stage will be placed into Group Review. (See stages Group Review)
  • Notifications are sent to Reviewers notifying them of proposals to review.
  • Log in as a Reviewer. (See Logging In)
  • 1 - From the Home page find Click to access all your Reviews.
  • Click Reviews.
    Or
  • 2 - From the Home page click Proposal Review List.
  • On the Review Proposal List select the proposal name in the Review Proposal column.
  • Click Download to access all documents.
  • Click Edit.
  • Add the adjusted scores and comments
    • Score - is an input from 0 (lowest) to 100 (highest) rating scale for each criterion 
      100 indicates that the proposal is fully satisfied and 0 indicates that the proposal did not satisfy the benchmark.
      Note: This score will indicate the amount of funding in the Final Funding Decision. 100=100%
    • Comment - enter up to 3 Proposal Strengths and 3 Proposal Weaknesses in the dialog boxes provided
      Short but descriptive responses in bullet form are acceptable and appreciated.
    • Rating Scale – This will display as stars and is an overall rating using the scale of 1=Poor to 5=Excellent.
    • Approval Scale - This will display as a heat signature and is an overall rating using the scale of 1=Poor to 5=Excellent.

Adding Deliverables to a Proposal

  • From the home page click Proposal List in the navigation bar. 
  • You can filter by RFP, Stage, Applicant and Panel Category.
  • Click on the Proposal Title you wish to edit.
  • Find Proposal Deliverables.
  • Click the deliverables Name, Type or Status.
  • Click + Upload New File.
  • Click Browse…
  • Select the deliverable file you wish to upload.
  • Click Update.

Deliverable Review

  • From the home page click Proposal List in the navigation bar. 
  • You can filter by RFP, Stage, Applicant and Panel Category.
  • Click on the Proposal Title you wish to edit.
  • Find Proposal Deliverables.
  • Click the deliverables Name, Type or Status.
  • Click Edit
  • Enter Delivery Date
  • Input Rating from 1 to 5: 1=Poor, 2=Marginal, 3=Satisfactory, 4=Very good, 5=Excellent
  • Fill in desired Comment.
  • Click Update.

Proposal Stages

Note: Access though Proposal list and specific Proposal you are moving.

...