Confluence Retirement

In an effort to consolidate USGS hosted Wikis, myUSGS’ Confluence service is scheduled for retirement on January 27th, 2023. The official USGS Wiki and collaboration space is now SharePoint. Please migrate existing spaces and content to the SharePoint platform and remove it from Confluence at your earliest convenience. If you need any additional information or have any concerns about this change, please contact myusgs@usgs.gov. Thank you for your prompt attention to this matter.
Child pages
  • Pinedale Anticline Data Management System (PADMS) Operator Manual

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Downloads

Downloads found on the PADMS Entry Page contain every operator in the PADMS application and the data they’ve entered.

...

The Printable Map button captures the map with the selected criteria displayed and allows the user to print the map. On the print page, the map is displayed along with a map legend below it which indicates what criteria is displayed. The user can zoom in and out on the map before printing.

Return to Table of Contents

Map Controls

  • Zoom in/out by using the vertical gray sliding bar in the upper left corner of the map
  • Change the background by selecting Map, Aerial, or Terrain from the upper right corner of the map
  • Pan the area by clicking the left mouse button and dragging
  • For additional information about a spatial feature, select a specific disturbance or reclamation area, or reference point by zooming in then clicking on the polygon. This will cause a pop-up box to appear with more information regarding the specific spatial feature.

...

Operator Summary Page

From the PADMS Entry Page, select an operator from the Operators list to navigate to the Operator Summary Page.

...

Return to Table of Contents

Editing a Location

The Locatin Location Edit Tools are found at the end of each row. The edit tools do not appear if you are not the operator for these locations.

...

Operator Main Menu

From the PADMS Entry Page, select an operator to navigate to the Operator Summary Page.

...

Location Entry Page

From the PADMS Entry Page, select an operator to navigate to the Operator Summary Page. Then Select the name of a location in the Location Summary Table.

...

Anchor
AddNewLocation
AddNewLocation
Adding and Editing a Location

From the PADMS Entry Page select an operator from the Operators list, which will navigate to the Operator Summary Page.

...

Editing a location is done from the Operator Summary Page. From the PADMS Entry Page, select an operator from the Operators list to navigate to the Operator Summary Page.

...

There are two places from which Spatial Reports can be accessed.

  • From the PADMS Entry Page the user selects an operator from the Operators list to navigate to the Operator Summary Page. Select the Date in any of the Status Reports fields for the particular location.
  • From the PADMS Entry Page, select an operator  to navigate to the Operator Summary Page. Select the name of the location to navigate to the Location Entry Page. Select Status Reports from the Navigation box on the left side of the screen.

...

Uploading an Individual Spatial Report

From the PADMS Entry Page, select and operator to navigate to the Operator Summary Page. Select the Name of a location in the Location Summary Table.

...

  • If spatial data hasn’t been entered for the location, the user can select the Add a Spatial Report link found in the right corner of the Location Entry Page.
  • Browse and select the zip file for upload
    • NOTE: once Sumbit Submit is selected it may takea  few moments for hte application to upload the data and verify that it contains no errors
  • If there are multiple SHP files included in the zip file the user will need to select which SHP needs to be uploaded into the system
  • Once the file has been read into the application, the user must then enter a Collection Date and select whether a polygon represents a disturbance or reclamation. . If the new reclamation polygon is known to be smaller than the previous reclamation polygon, select Yes to the corresponding question to allow the polygon to be uploaded without issue.
  • Select Save, or select cancel to stop the process, or go back to the list of SHP files to pick a different one

...

Editing and Deleting an Individual Spatial Report

From the PADMS Entry Page, select an operator from the Operators list to navigate to the Operators list to navigate to the Operator Summary Page. The user can navigate to an individual spatial report for a specific location by one of two links.

...

Uploading, Editing, and Deleting Individual Photographs

From the PADMS Entry Page, select an operator from the Operators list to navigate to the Operator Summary Page. Select the name of the location to navigate to the Location Entry Page

...

Editing and Deleting Uploaded Photographs

Start from the PADMS Entry Page and select an operator from the Operators list to navigate to the Operator Summary Page. Select the name of the location to navigate to the Location Entry Page.

...

Uploading, Editing, and Deleting Individual Status Reports

From the PADMS Entry Page select an operator from the Operators list, which will navigate to the Operator Summary Page. Select the name of the location to navigate to the Location Entry Page. Select the Status Report link found in the Navigation box on the left side of the screen.

...

Entering, Editing, and Deleting Status Reports

From the PADMS Entry Page, select an operator from the Operators list to navigate to the Operator Summary Page. Select the name of a location to navigate to the Location Entry Page.

...

Editing and Deleting an Existing Status Report

From the PADMS Entry Page select an operator from the Operators list to navigate to the Operator Summary Page. Select the date in any of the  Status Reports fields for the particular location. Or, from the PADMS Entry Page select an operator from the Operators list to navigate to the Operator Summary Page. Select the Name of the location to navigate to the Location Entry Page. Then select Status Reports from the Navigation box on the left side of the screen. 

...

Return to Table of Contents

Batch Uploads

From the PADMS Entry Page, select an operator from the Operators list to navigate to the Operator Summary Page.

...

Uploading Batch Photograph Files

Start from the PADMS Entry Page and selet an operator from the Operators list to navigate to the Operator Summary Page.

...

Downloading Data Forms

Start at the PADMS Entry Page.

  • The user must be logged into the PADMS application
  • Select the Status Report Files (xls) found in the Reports, Downloads & Interactive Maps section under the Downloads heading
  • This link will direct the user to the PADMS Data Templates. The user can select the data form to download by clicking on the data form name

...

Uploading Batch Frequency Files

Start from the PADMS Entry Page and select an operator from the Operators list to navigate to the Operator Summary Page.

...

Uploading Batch Line-point Intercept Files

Start from the PADMS Entry Page and select an operator from the Operators list to navigate to the Operator Summary Page.

...

Uploading Batch Qualitative Files

Start from the PADMS Entry Page and select an operator from the Operators list to navigate to the Operator Summary Page.

...