Confluence Retirement

Due to the feedback from stakeholders and our commitment to not adversely impact USGS science activities that Confluence supports, we are extending the migration deadline to January 2023.

In an effort to consolidate USGS hosted Wikis, myUSGS’ Confluence service is targeted for retirement. The official USGS Wiki and collaboration space is now SharePoint. Please migrate existing spaces and content to the SharePoint platform and remove it from Confluence at your earliest convenience. If you need any additional information or have any concerns about this change, please contact myusgs@usgs.gov. Thank you for your prompt attention to this matter.


Quick Links

Child pages
  • Study Reaches
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Next »

Definition

A Study Reach is a length of stream selected for sampling purposes. The principal sampling unit for collecting (and analyzing) physical, chemical, and biological data. Typically the reach is selected to be representative of the stream's condition and the length sampled is usually proportional to the channel dimensions (i.e. channel width), however, for a particular sampling program the reach length may have a minimum or maximum value (domain range) or be a fixed length within a certain range of values

 

Key Points

  • Site and Reach Name are required.
  • Delineation Date is highly recommended.
  • BioData Study Reaches are project and station-specific, so the full reach name is a combination of 1) SiteNumber, 2) ReachName, and 3) Project (e.g. SiteNumber-ReachName-Project). For example, '43185411440912–visitor center-SilverTNC' is a reach near NWIS station 43185411440912 used byt the SilverTNC project that they called "visitor center"
  • The design of the BioData Study Reach incorporates ideas from NAWQA, NRSA, and other ecological studies. You may delineate a study reach in several ways, including:
  • Narrative description
  • In relation to a Reference Location
  • Upstream and downstream boundaries (Latitude/Longitude or Description)

Conventions for recording reach boundaries

Curvilinear distance (along thalweg) from the reference location to the upstream and downstream reach boundaries, follows this convention:

If either boundary is upstream from the reference location, its value is negative; otherwise, value is positive. When this convention is followed, the "Curvilinear distance to downstream boundary" MINUS "Curvilinear distance to upstream boundary" = "Curvilinear Reach length"

An illustration of this convention. The stars (star) represent reference locations, in three examples, A, B, C.

  • No labels