I am having some issues when computing discharge in the latest version of RIVeR (v2.4.2) and I'm wondering whether anyone else has experienced the same.

These issues can be summarized as follows:


Figure 1: no data in ...StationDischarge.txt


Figure 2: ...StationVelocity.txt data


Figure 3. Note the number of data points for discharge and velocity in the plot on the right hand side does not match the number of stations in the cross section (should be 25). the correct number of stations and velocity points do appear in the table and the exported ...StationVelocity.txt file).


Table 1: Manual check of total discharge, using StationVelocity.txt data from RIVeR (Area and Q manually computed using station dis and velocity respectively.

StDepthStationVelocity

()(m)dis (m)(m/s)AreaQ
00

(m^2)(m^3/s)
10.0900.101460.2268980.023021
20.162.521090.04560.8067470.036788
30.265.042170.321731.3109640.421777
40.287.563260.290351.4118080.409918
50.3610.084340.121861.8151810.221198
60.4312.605430.278022.1681330.602784
70.4915.126510.312612.4706630.772354
80.5517.64760.423972.7731941.175751
90.6520.168680.593033.2774111.943603
100.6622.689770.539153.3278321.794201
110.7925.210850.454163.9833141.809062
120.8227.731940.396084.1345791.637624
130.9130.253020.374964.5883751.720457
140.9132.774110.353664.5883751.622725
150.9435.295190.381854.739641.809831
160.8637.816280.309744.3362661.343115
170.940.337360.299964.5379531.361204
181.0342.858450.243065.1934351.262316
191.0845.379530.224645.4455441.223287
201.147.900620.217475.5463871.206173
211.0250.42170.240865.1430131.238746
220.6952.942790.145733.4791040.50701
230.6655.463880.147783.3278320.491787
240.3957.984960.105531.9664460.207519
25060.506050.097300




Total Q = 24.84225