Description: This part of SIM 3254 presents data for part of the acoustic-backscatter map (see sheet 3, SIM 3254) of the Offshore of Ventura map area, California. The raster data file is included in "BackscatterA_CSUMB_OffshoreVentura.zip," which is accessible from http://pubs.usgs.gov/ds/781/OffshoreVentura/data_catalog_OffshoreVentura.html. The acoustic-backscatter map of the Offshore of Ventura map area, California, was generated from backscatter data collected by California State University, Monterey Bay, Seafloor Mapping Lab (CSUMB) and by the U.S. Geological Survey (USGS). These metadata describe the acoustic-backscatter data collected by CSUMB and reprocessed by the USGS (see "BackscatterB_USGS_OffshoreVentura_metadata.txt" metadata for a description of the acoustic-backscatter data collected by the USGS). The majority of the acoustic-backscatter data within the Offshore of Ventura map area, California, was collected by CSUMB in the summers of 2006 and 2007, using a 244-kHz Reson 8101 multibeam echosounder. Within the final imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and sediment type. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones).
Description: This part of SIM 3254 presents data for faults for the geologic and geomorphic map (see sheet 10, SIM 3254) of the Offshore of Ventura map area, California. The vector data file is included in "Faults_OffshoreVentura.zip," which is accessible from http://pubs.usgs.gov/ds/781/OffshoreVentura/data_catalog_OffshoreVentura.html. The Offshore of Ventura map area is in the Ventura Basin, in the southern part of the Western Transverse Ranges geologic province, which is north of the California Continental Borderland (Fisher and others, 2009). This province has undergone significant north-south compression since the Miocene, and recent GPS data suggest north-south shortening of about 6 to 10 mm/yr (Larson and Webb, 1992; Donnellan and others, 1993). The active, north-verging Oak Ridge Fault and the south-verging Pitas Point-Ventura Fault are two of the structures on which this shortening occurs (for example, Sorlien and others, 2000; Fisher and others, 2005, 2009). High-resolution seismic-reflection profiles (sheet 8, SIM 3254) reveal that neither fault ruptures the surface; instead, the surface expression of each fault is a narrow, asymmetric fold that involves the uppermost Pleistocene and Holocene (less than 21 ka) sedimentary section. Both structures are inferred to be parts of long fault systems that extend for more than 100 km, representing important potential earthquake hazards (for example, Fisher and others, 2009). Shortening is also occurring on the Montalvo Fault and Anticline system along the southeast edge of the map area (part of the broader Oak Ridge Fault Zone; Yeats, 1998) and on the Rincon-Ventura Avenue Anticline (for example, Rockwell and others, 1988), which crosses the northwest edge of the map area.
Description: This part of SIM 3254 presents data for folds for the geologic and geomorphic map (see sheet 10, SIM 3254) of the Offshore of Ventura map area, California. The vector data file is included in "Folds_OffshoreVentura.zip," which is accessible from http://pubs.usgs.gov/ds/781/OffshoreVentura/data_catalog_OffshoreVentura.html. The Offshore of Ventura map area is in the Ventura Basin, in the southern part of the Western Transverse Ranges geologic province, which is north of the California Continental Borderland (Fisher and others, 2009). This province has undergone significant north-south compression since the Miocene, and recent GPS data suggest north-south shortening of about 6 to 10 mm/yr (Larson and Webb, 1992; Donnellan and others, 1993). The active, north-verging Oak Ridge Fault and the south-verging Pitas Point-Ventura Fault are two of the structures on which this shortening occurs (for example, Sorlien and others, 2000; Fisher and others, 2005, 2009). High-resolution seismic-reflection profiles (sheet 8, SIM 3254) reveal that neither fault ruptures the surface; instead, the surface expression of each fault is a narrow, asymmetric fold that involves the uppermost Pleistocene and Holocene (less than 21 ka) sedimentary section. Both structures are inferred to be parts of long fault systems that extend for more than 100 km, representing important potential earthquake hazards (for example, Fisher and others, 2009). Shortening is also occurring on the Montalvo Fault and Anticline system along the southeast edge of the map area (part of the broader Oak Ridge Fault Zone; Yeats, 1998) and on the Rincon-Ventura Avenue Anticline (for example, Rockwell and others, 1988), which crosses the northwest edge of the map area.
Description: This part of SIM 3254 presents data for the geologic and geomorphic map (see sheet 10, SIM 3254) of the Offshore of Ventura map area, California. The vector data file is included in "Geology_OffshoreVentura.zip," which is accessible from http://pubs.usgs.gov/ds/781/OffshoreVentura/data_catalog_OffshoreVentura.html. The offshore part of the map area largely consists of a relatively shallow (less than 40 m deep), gently offshore-dipping (less than 1 degree) shelf underlain by recent marine and deltaic deposits of the Santa Clara and Ventura Rivers. The mean annual sediment load of these two rivers exceeds 3.25 kt/yr (Warrick and Farnsworth, 2009a), and the area is largely part of an extensive Quaternary deltaic depocenter (Dahlen, 1992; Slater and others, 2002; Sommerfield and others, 2009). Shelf deposits are primarily sand (Qms) at depths less than about 25 m and, at depths greater than about 25 m, are more fine-grained sediment (very fine sand, silt and clay) (Qmsf). The boundary between Qms and Qmsf is based on observations and extrapolation from sediment sampling (for example, Reid and others, 2006) and camera ground-truth surveying (see sheet 6, SIM 3254). Given that this is an area of abundant sediment supply and active sediment transport (Barnard and others, 2009; Warrick and Farnsworth, 2009a), it is important to note that the boundary between Qms and Qmsf should be considered transitional and approximate and is expected to shift as a result of seasonal- to annual- to decadal-scale cycles in wave climate, sediment supply, and sediment transport. Offshore of the mouth of the Ventura River, at water depths of between 20 and 30 m, the sandy shelf (Qms) includes an area of irregular arcuate depressions floored by coarser sediment (coarse sand and possibly gravel; Qmss). Such features have been referred to as "rippled-scour depressions" (for example, Cacchione and others, 1984) or "sorted bedforms" (for example, Goff and others, 2005; Trembanis and Hume, 2011). Although the general area in which Qmss depressions are found is not likely to change substantially, the boundaries of the unit(s), as well as the locations of individual depressions and their intervening flat sand sheets, likely are ephemeral, changing during significant storm events. Coarser grained deposits (Qmsc), which are recognized on the basis of high backscatter (sheet 3, SIM 3254), camera observations (sheet 6, SIM 3254), and sampling (Reid and others, 2006; Barnard and others, 2009), are found locally in water depths less than about 15 m. These units are concentrated at the mouths of the Santa Clara and Ventura Rivers and a few smaller coastal watersheds to the northwest, and they are inferred to represent wave-winnowed lags of deltaic sediment. It is likely that these deposits are ephemeral and are commonly covered by finer grained sediment. However, a few outcrops of Qmsc between Ventura and Pitas Point are not obviously tied to coastal watersheds. One large area in particular is characterized by high backscatter and rugosity (sheets 3 and 5, SIM 3254, respectively); camera ground-truth aurveying (sheet 6, SIM 3254) reveals that this area consists of boulder, cobble, gravel, and sand. The area lies immediately offshore of steep slopes underlain by variably consolidated Pliocene and Pleistocene deposits (sand, gravel, cobbles) of the Pico, Santa Barbara, and Saugus Formations (onshore units Tp, QTsb, and Qs, respectively), which are highly susceptible to landsliding (Tan and others, 2003a,b); thus, this area mostly likely represents wave-winnowed landslide deposits. It is also possible that these high-backscatter areas are partly underlain by bedrock, as is inferred on sheet 7 (SIM 3254). The steep onshore slopes are immediately north of, and in the hanging wall of, the active Pitas Point Fault, a location that undoubtedly has contributed to slope instability. The seafloor bedrock exposures south and west of Punta Gorda are inferred to consist of the Pico Formation (Tp) on the basis of their backscatter, rugosity, and relief, as well as adjacent exposures of Tp in coastal bluffs and platforms and their similar location along the axis of the Rincon-Ventura Avenue Anticline (Tan and others, 2003a,b). A few shallow (less than 10 m deep) areas offshore between Punta Gorda and Pitas Point are inferred to be underlain by a composite unit (Qms/Tp) consisting of the Pico Formation overlain by a thin (probably ephemeral) marine-sediment layer.
The Offshore of Ventura map area is in the Ventura Basin, in the southern part of the Western Transverse Ranges geologic province, which is north of the California Continental Borderland (Fisher and others, 2009). This province has undergone significant north-south compression since the Miocene, and recent GPS data suggest north-south shortening of about 6 to 10 mm/yr (Larson and Webb, 1992; Donnellan and others, 1993). The active, north-verging Oak Ridge Fault and the south-verging Pitas Point-Ventura Fault are two of the structures on which this shortening occurs (for example, Sorlien and others, 2000; Fisher and others, 2009). High-resolution seismic-reflection data (sheet 8, SIM 3254) reveal that neither fault ruptures the surface; instead the surface expression of each fault is a narrow, asymmetric fold that involves the uppermost Pleistocene and Holocene (less than 21 ka) sedimentary section. Both structures are inferred to be parts of long fault systems that extend for more than 100 km, representing important potential earthquake hazards (for example, Fisher and others, 2009). Shortening is also occurring on the Montalvo Fault and Anticline system along the southeast edge of the map area (part of the broader Oak Ridge Fault Zone; Yeats, 1998) and on the Rincon-Ventura Avenue Anticline (for example, Rockwell and others, 1988), which crosses the northwest edge of the map area.
Description: This part of SIM 3254 presents data for the habitat map of the seafloor (see sheet 7, SIM 3254) of the Offshore of Ventura map area, California. The vector data file is included in "Habitat_OffshoreVentura.zip," which is accessible from http://pubs.usgs.gov/ds/781/OffshoreVentura/data_catalog_OffshoreVentura.html. Using multibeam echosounder (MBES) bathymetry and backscatter data, potential marine benthic habitat maps were constructed. The habitats were based on substrate types and documented or "ground truthed" using underwater video images and seafloor samples obtained by the USGS. These maps display various habitat types that range from flat, soft, unconsolidated sediment-covered seafloor to hard, deformed (folded), or highly rugose and differentially eroded bedrock exposures. Rugged, high-relief, rocky outcrops that have been eroded to form ledges and small caves are ideal habitat for rockfish (Sebastes spp.) and other bottom fish such as lingcod (Ophiodon elongatus). Habitat map is presented in a map format generated in a GIS (ArcMap), and both digital and hard-copy versions will be produced.
Description: This part of SIM 3254 presents data for the seafloor-character map (see sheet 7, SIM 3254) of the Offshore of Ventura map area, California. The raster data file is included in "SeafloorCharacter_OffshoreVentura.zip," which is accessible from http://pubs.usgs.gov/ds/781/OffshoreVentura/data_catalog_OffshoreVentura.html. This raster-format seafloor-character map shows four substrate classes in the Offshore of Ventura map area. The substrate classes mapped in this area have been colored to indicate which of the following California Marine Life Protection Act depth zones and slope classes they belong: Depth Zone 2 (intertidal to 30 m), Depth Zone 3 (30 to 100 m), and Slope Class 1 (0 degrees - 5 degrees). Depth Zones 1 (intertidal) and 4 to 5 (greater than 100 m), as well as Slopes Classes 2 to 4 (greater than 5ø), are not present in this map area. The map is created using a supervised classification method described by Cochrane (2008), available at http://doc.nprb.org/web/research/research%20pubs/615_habitat_mapping_workshop/Individual%20Chapters%20High-Res/Ch13%20Cochrane.pdf. Additional information about the field activities from which this data set was derived are available online by field activities Z-2-06-SC and S-W1-09-SC: <http://walrus.wr.usgs.gov/infobank/z/z206sc/html/z-2-06-sc.meta.html> and <http://walrus.wr.usgs.gov/infobank/s/sw109sc/html/s-w1-09-sc.meta.html>.
Description: This part of SIM 3254 presents data for the bathymetry and shaded-relief maps (see sheets 1, 2, SIM 3254) of the Offshore of Ventura map area, California. The raster data file for the bathymetry map is included in "Bathymetry_OffshoreVentura.zip." The raster data file for the shaded-relief map is included in "BathymetryHS_OffshoreVentura.zip." Both are accessible from http://pubs.usgs.gov/ds/781/OffshoreVentura/data_catalog_OffshoreVentura.html. The bathymetry and shaded-relief maps of the Offshore of Ventura map area, California, were generated from bathymetry data collected by California State University, Monterey Bay, Seafloor Mapping Lab (CSUMB) and by the U.S. Geological Survey (USGS). Most of the offshore area was mapped by CSUMB in the summers of 2006 and 2007, using a 244-kHz Reson 8101 multibeam echosounder. The seafloor west of Ventura Harbor was mapped by the USGS in 2006 and 2010, using 117-kHz (2006) and 234.5-kHz (2010) SEA (AP) Ltd. SWATHplus-M phase-differencing sidescan sonars. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters.
Description: This part of SIM 3254 presents data for part of the acoustic-backscatter map (see sheet 3, SIM 3254) of the Offshore of Ventura map area, California. The raster data file is included in "BackscatterA_CSUMB_OffshoreVentura.zip," which is accessible from http://pubs.usgs.gov/ds/781/OffshoreVentura/data_catalog_OffshoreVentura.html. The acoustic-backscatter map of the Offshore of Ventura map area, California, was generated from backscatter data collected by California State University, Monterey Bay, Seafloor Mapping Lab (CSUMB) and by the U.S. Geological Survey (USGS). These metadata describe the acoustic-backscatter data collected by CSUMB and reprocessed by the USGS (see "BackscatterB_USGS_OffshoreVentura_metadata.txt" metadata for a description of the acoustic-backscatter data collected by the USGS). The majority of the acoustic-backscatter data within the Offshore of Ventura map area, California, was collected by CSUMB in the summers of 2006 and 2007, using a 244-kHz Reson 8101 multibeam echosounder. Within the final imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and sediment type. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones).
Description: This part of SIM 3254 presents data for part of the acoustic-backscatter map (see sheet 3, SIM 3254) of the Offshore Ventura map area, California. The raster data file is included in "BackscatterB_USGS_OffshoreVentura.zip," which is accessible from http://pubs.usgs.gov/ds/781/OffshoreVentura/data_catalog_OffshoreVentura.html. The acoustic-backscatter map of the Offshore Ventura map area, California, was generated from backscatter data collected by California State University, Monterey Bay, Seafloor Mapping Lab (CSUMB) and by the U.S. Geological Survey (USGS). These metadata describes the acoustic-backscatter data collected by the USGS (see "BackscatterA_CSUMB_OffshoreVentura_metadata.txt" metadata for a description of the acoustic-backscatter data collected by CSUMB). The seafloor west of Ventura Harbor was mapped by the USGS in 2006 and 2010, using 117-kHz (2006) and 234.5-kHz (2010) SEA (AP) Ltd. SWATHplus-M phase-differencing sidescan sonars. These mapping missions collected acoustic-backscatter data from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. Within the acoustic-backscatter imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and sediment type. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones).
Description: This part of SIM 3254 presents data for part of the acoustic-backscatter map (see sheet 3, SIM 3254) of the Offshore Ventura map area, California. The raster data file is included in "BackscatterB_USGS_OffshoreVentura.zip," which is accessible from http://pubs.usgs.gov/ds/781/OffshoreVentura/data_catalog_OffshoreVentura.html. The acoustic-backscatter map of the Offshore Ventura map area, California, was generated from backscatter data collected by California State University, Monterey Bay, Seafloor Mapping Lab (CSUMB) and by the U.S. Geological Survey (USGS). These metadata describes the acoustic-backscatter data collected by the USGS (see "BackscatterA_CSUMB_OffshoreVentura_metadata.txt" metadata for a description of the acoustic-backscatter data collected by CSUMB). The seafloor west of Ventura Harbor was mapped by the USGS in 2006 and 2010, using 117-kHz (2006) and 234.5-kHz (2010) SEA (AP) Ltd. SWATHplus-M phase-differencing sidescan sonars. These mapping missions collected acoustic-backscatter data from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. Within the acoustic-backscatter imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and sediment type. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones).
Description: This part of SIM 3254 presents data for the bathymetry and shaded-relief maps (see sheets 1, 2, SIM 3254) of the Offshore of Ventura map area, California. The raster data file for the bathymetry map is included in "Bathymetry_OffshoreVentura.zip." The raster data file for the shaded-relief map is included in "BathymetryHS_OffshoreVentura.zip." Both are accessible from http://pubs.usgs.gov/ds/781/OffshoreVentura/data_catalog_OffshoreVentura.html. The bathymetry and shaded-relief maps of the Offshore of Ventura map area, California, were generated from bathymetry data collected by California State University, Monterey Bay, Seafloor Mapping Lab (CSUMB) and by the U.S. Geological Survey (USGS). Most of the offshore area was mapped by CSUMB in the summers of 2006 and 2007, using a 244-kHz Reson 8101 multibeam echosounder. The seafloor west of Ventura Harbor was mapped by the USGS in 2006 and 2010, using 117-kHz (2006) and 234.5-kHz (2010) SEA (AP) Ltd. SWATHplus-M phase-differencing sidescan sonars. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters.