Description: This part of DS 781 presents data for the bathymetric contours for several seafloor maps of the Offshore of Fort Ross map area, California. The vector data file is included in "Contours_OffshoreFortRoss.zip," which is accessible from http://pubs.usgs.gov/ds/781/OffshoreFortRoss/data_catalog_OffshoreFortRoss.html. 10-m interval contours of the Offshore of Fort Ross map area, California, were generated from bathymetry data collected by California State University, Monterey Bay (CSUMB) and by Fugro Pelagos. Mapping was completed between 2007 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 468-kHz SEA SWATHPlus interferometric system. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of California State Waters. Bathymetric contours at 10-m intervals were generated from a modified 2-m bathymetric surface. The original surface was smoothed using the Focal Mean tool in ArcGIS and a circular neighborhood with a radius of 20 to 30 meters (depending on the area). The contours were generated from this smoothed surface using the ArcGIS Spatial Analyst Contour tool. The most continuous contour segments were preserved while smaller segments and isolated island polygons were excluded from the final output. The contours were then clipped to the boundary of the map area. These data are not intended for navigational purposes.
Description: This part of DS 781 presents data for folds for the geologic and geomorphic map of the Offshore of Fort Ross map area, California. The vector data file is included in "Folds_OffshoreFortRoss.zip," which is accessible from http://pubs.usgs.gov/ds/781/OffshoreFortRoss/data_catalog_OffshoreFortRoss.html. The Offshore of Fort Ross map area is cut by the northwest-trending San Andreas Fault, the right-lateral transform boundary between the North American and Pacific tectonic plates. The San Andreas extends across the inner shelf in the southern part of the map, then crosses the shoreline at Fort Ross and continues onland for about 75 km to the east flank of Point Arena (fig. 8-1). Seismic-reflection data are used to map the offshore fault trace, and reveal a relatively simple, 200- to 500-m wide zone typically characterized by one or two primary strands. About 1500 m west of the San Andreas Fault, the mid shelf (between water depths of 40 m and 70 m) in the southernmost part of the map area includes an about 5-km-wide field of elongate, shore-normal sediment lobes (unit Qmsl). Individual lobes within the field are as much as 650-m long and 200-m wide, have as much as 1.5 m (check with Steve) of relief above the surrounding smooth seafloor, and are commonly connected with upslope chutes. Given their morphology and proxmity to the San Andreas fault, we infer that these lobes result from slope failures associated with strong ground motions triggered by large San Andreas earthquakes. Movement on the San Andreas has juxtaposed different coastal bedrock blocks. Rocks east of the fault that occur along the coast and in the nearshore belong to the late Tertiary, Cretaceous, and Jurassic Franciscan Complex, either sandstone of the Coastal Belt or Central Belt (unit TKfs) or melange of the central terrane (unit fsr). Bedrock west of the fault are considered part of the Gualala Block and include the Eocene and Paleocene German Rancho Formation (unit Tgr) and the Miocene sandstone and mudstone of the Fort Ross area (unit Tsm). This section of the San Andreas Fault onland has an estimated slip rate of about 17 to 25 mm/yr. The devastating Great 1906 California earthquake (M 7.8) is thought to have nucleated on the San Andreas Fault about 100 kilometers south of this map area offshore of San Francisco, with the rupture extending northward through the Offshore of Fort Ross map area to the south flank of Cape Mendocino. Emergent marine terraces along the coast in the Offshore of Fort Ross map area record recent contractional deformation associated with the San Andreas Fault system. Prentice and Kelson (2006) report uplift rates of 0.3 to 0.6 mm/yr for a late Pleistocene terrace exposed at Fort Ross, and this recent uplift must also have affect the nearshore and inner shelf. Previously, McCulloch (1987) mapped a nearshore (within 3 to 5 km of the coast) fault zone from Point Arena to Fort Ross using primarily deeper industry seismic-reflection data. Subsequently, Dickinson and others (2005) named this structure the "Gualala Fault." Our mapping, also based on seismic-reflection data, reveals this structure as a steep, northeast trending fault and similarly shows the fault ending to the south in the northern part of the Offshore of Fort Ross map area. We have designated the zone of faulting and folding above this structure the "Gualala Fault deformation zone". Folds were primarily mapped by interpretation of seismic reflection profile data (see field activity S-8-09-NC). The seismic reflection profiles were collected between 2007 and 2010.
Description: This part of DS 781 presents data for faults for the geologic and geomorphic map of the Offshore of Fort Ross map area, California. The vector data file is included in "Faults_OffshoreFortRoss.zip," which is accessible from http://pubs.usgs.gov/ds/781/OffshoreFortRoss/data_catalog_OffshoreFortRoss.html. The Offshore of Fort Ross map area is cut by the northwest-trending San Andreas Fault, the right-lateral transform boundary between the North American and Pacific tectonic plates. The San Andreas extends across the inner shelf in the southern part of the map, then crosses the shoreline at Fort Ross and continues onland for about 75 km to the east flank of Point Arena. Seismic-reflection data are used to map the offshore fault trace, and reveal a relatively simple, 200- to 500-m wide zone typically characterized by one or two primary strands. About 1500 m west of the San Andreas Fault, the mid shelf (between water depths of 40 m and 70 m) in the southernmost part of the map area includes an about 5-km-wide field of elongate, shore-normal sediment lobes (unit Qmsl). Individual lobes within the field are as much as 650-m long and 200-m wide, have as much as 1.5 m of relief above the surrounding smooth seafloor, and are commonly connected with upslope chutes. Given their morphology and proxmity to the San Andreas fault, we infer that these lobes result from slope failures associated with strong ground motions triggered by large San Andreas earthquakes. Movement on the San Andreas has juxtaposed different coastal bedrock blocks. Rocks east of the fault that occur along the coast and in the nearshore belong to the late Tertiary, Cretaceous, and Jurassic Franciscan Complex, either sandstone of the Coastal Belt or Central Belt (unit TKfs) or melange of the central terrane (unit fsr). Bedrock west of the fault are considered part of the Gualala Block and include the Eocene and Paleocene German Rancho Formation (unit Tgr) and the Miocene sandstone and mudstone of the Fort Ross area (unit Tsm). This section of the San Andreas Fault onland has an estimated slip rate of about 17 to 25 mm/yr. The devastating Great 1906 California earthquake (M 7.8) is thought to have nucleated on the San Andreas Fault about 100 kilometers south of this map area offshore of San Francisco, with the rupture extending northward through the Offshore of Fort Ross map area to the south flank of Cape Mendocino. Emergent marine terraces along the coast in the Offshore of Fort Ross map area record recent contractional deformation associated with the San Andreas Fault system. Prentice and Kelson (2006) report uplift rates of 0.3 to 0.6 mm/yr for a late Pleistocene terrace exposed at Fort Ross, and this recent uplift must also have affect the nearshore and inner shelf. Previously, McCulloch (1987) mapped a nearshore (within 3 to 5 km of the coast) fault zone from Point Arena to Fort Ross (Fig. 8-1) using primarily deeper industry seismic-reflection data. Subsequently, Dickinson and others (2005) named this structure the "Gualala Fault." Our mapping, also based on seismic-reflection data, reveals this structure as a steep, northeast trending fault and similarly shows the fault ending to the south in the northern part of the Offshore of Fort Ross map area. We have designated the zone of faulting and folding above this structure the "Gualala Fault deformation zone." Faults were primarily mapped by interpretation of seismic reflection profile data (see field activity S-8-09-NC). The seismic reflection profiles were collected between 2007 and 2010.
Description: This part of DS 781 presents data for the geologic and geomorphic map of the Offshore of Fort Ross map area, California. The vector data file is included in "Geology_OffshoreFortRoss.zip," which is accessible from http://pubs.usgs.gov/ds/781/OffshoreFortRoss/data_catalog_OffshoreFortRoss.html. The morphology and the geology of the offshore part of the Offshore of Fort Ross map area result from the interplay between local sedimentary processes, oceanography, sea-level rise, and tectonics. The nearshore seafloor in the northern half of the map area is characterized by rocky outcrops of Tertiary sedimentary rocks (units Tgr and Tsm). This rugged nearshore zone and the inner shelf (to water depths of about 50 m) typically dip seaward about 1.5 to 2.5 degrees, whereas the mid-shelf within State Waters (about 50 to 85 m) dips more gently, about 0.4 degrees. In contrast, the nearshore to mid shelf in the southern half of the map area lies directly offshore of the mouth of the Russian River and has a more gentle, uniform dip, about 0.45 to 0.55 degrees, out to water depths of about 70 m at the outer limit of State Waters. A significant amount of the Russian River sediment load, estimated at about 900,000 metric tons/yr by Farnsworth and Warrick (2007) is deposited offshore of the river mouth, contributing to the noted north-to-south contrast in bathymetric slope. On a larger geomorphic scale, sea level has risen about 125 to 130 m over about the last 21,000 years (for example, Lambeck and Chappell, 2001; Peltier and Fairbanks, 2005), leading to broadening of the continental shelf, progressive eastward migration of the shoreline and wave-cut platform, and associated transgressive erosion and deposition. Tectonic influences impacting shelf geomorphology and geology are primarily related to the active San Andreas Fault system (see below). Given exposure to high wave energy, modern nearshore to inner-shelf sediments north of the mouth of the Russian River are mostly sand (unit Qms) and a mix of sand, gravel, and cobbles (units Qmsc and Qmsd). The more coarse-grained sands and gravels (units Qmsc and Qmsd) are primarily recognized on the basis of bathymetry and high backscatter. Both Qmsc and Qmsd typically have abrupt landward contacts with bedrock (units Tgr, Tsm, Tkfs, fsr) and form irregular to lenticular exposures that are commonly elongate in the shore-normal direction. Contacts between units Qmsc and Qms are typically gradational. Unit Qmsd forms erosional lags in scoured depressions that are bounded by relatively sharp and less commonly diffuse contacts with unit Qms horizontal sand sheets. These depressions are typically a few tens of centimeters deep and range in size from a few 10's of sq m to more than one sq km. Similar Qmsd scour depressions are common along this stretch of the California coast, where surficial offshore sandy sediment is relatively thin (thus unable to fill the depressions) due to both lack of sediment supply and to erosion and transport of sediment during large northwest winter swells. Such features have been referred to as "rippled-scour depressions" or "sorted bedforms". Although the general areas in which both Qmsd scour depressions and surrounding mobile sand sheets occur are not likely to change substantially, the boundaries of the individual Qmsd depressions are likely ephemeral, changing seasonally and during significant storm events. Unit Qmsf lies offshore of unit Qms, and consists primarily of mud and muddy sand and is commonly extensively bioturbated. The water depth of the transition from sand-dominated marine sediment (unit Qms) to mud-dominated marine sediment (Qmsf) increases from about 45 to 50 m directly offshore of the mouth of the Russian River to as much as about 60 m adjacent to the rocky outcrops along the northern map boundary. This change is clearly related to the large amount of fine sediment load carried by the Russian River, which feeds a widespread, mid-shelf, mud belt that extends along the mid-shelf from Point Arena to Point Reyes. Map unit polygons were digitized over underlying 2-meter base layers developed from multibeam bathymetry and backscatter data (see Bathymetry--Offshore Fort Ross, California and Backscattter A to C--Offshore Fort Ross, California, DS 781, for more information). The bathymetry and backscatter data were collected between 2006 and 2009.
Description: This part of DS 781 presents data for the habitat map of the seafloor of the Offshore of Fort Ross map area, California. The polygon shapefile is included in "Habitat_OffshoreFortRoss.zip," which is accessible from http://pubs.usgs.gov/ds/781/OffshoreFortRoss/data_catalog_OffshoreFortRoss.html. Using multibeam echosounder (MBES) bathymetry and backscatter data, potential marine benthic habitat maps were constructed. The habitats were based on substrate types and documented or "ground truthed" using underwater video images and seafloor samples obtained by the USGS. These maps display various habitat types that range from flat, soft, unconsolidated sediment-covered seafloor to hard, deformed (folded), or highly rugose and differentially eroded bedrock exposures. Rugged, high-relief, rocky outcrops that have been eroded to form ledges and small caves are ideal habitat for rockfish (Sebastes spp.) and other bottom fish such as lingcod (Ophiodon elongatus).
Description: This part of DS 781 presents the seafloor-character map Offshore of Fort Ross, California (raster data file is included in "SeafloorCharacter_OffshoreFortRoss.zip," which is accessible from http://pubs.usgs.gov/ds/781/OffshoreFortRoss/data_catalog_OffshoreFortRoss.html). This raster-format seafloor-character map shows four substrate classes offshore of Fort Ross, California. The substrate classes mapped in this area have been further divided into the following California Marine Life Protection Act depth zones and slope classes: Depth Zone 2 (intertidal to 30 m), Depth Zone 3 (30 to 100 m), Slope Class 1 (0 degrees - 5 degrees), and Slope Class 2 (5 degrees - 30 degrees). Depth Zone 1 (intertidal), Depth Zone 4 (100 to 200 m), Depth Zone 5 (greater than 200 m), and Slopes Classes 3-4 (greater than 30 degrees) are not present in the region covered by this block. The map is created using a supervised classification method described by Cochrane (2008), available at http://doc.nprb.org/web/research/research%20pubs/615_habitat_mapping_workshop/Individual%20Chapters%20High-Res/Ch13%20Cochrane.pdf.
Description: This part of DS 781 presents data for the bathymetry and shaded-relief maps of the Offshore of Fort Ross map area, California. Raster data file is included in "Bathymetry_OffshoreFortRoss.zip," which is accessible from http://pubs.usgs.gov/ds/781/OffshoreFortRoss/data_catalog_OffshoreFortRoss.html. The bathymetry and shaded-relief maps of the Offshore of Fort Ross Map Area, California, were generated from bathymetry data collected by California State University, Monterey Bay (CSUMB), and by Fugro Pelagos. Mapping was completed between 2007 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 468-kHz SEA SWATHPlus interferometric system. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters.
Description: This part of DS 781 presents data for the acoustic-backscatter map of the Offshore of Fort Ross map area, California. Backscatter data are provided as separate grids depending on mapping system or processing method. The raster data file is included in "BackscatterA_8101_OffshoreFortRoss.zip", which is accessible from http://pubs.usgs.gov/ds/781/OffshoreFortRoss/data_catalog_OffshoreFortRoss.html. The acoustic-backscatter map of the Offshore of Fort Ross map area, California, was generated from backscatter data collected by California State University, Monterey Bay (CSUMB) and by Fugro Pelagos. Mapping was completed between 2007 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 468-kHz SEA SWATHPlus interferometric system. These mapping missions combined to collect backscatter data from about the 10-m isobath to beyond the 3-nautical-mile limit of California State Waters. Within the acoustic-backscatter imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and composition. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones). These data are not intended for navigational purposes.
Description: This part of DS 781 presents data for the acoustic-backscatter map of the Offshore of Fort Ross map area, California. Backscatter data are provided as separate grids depending on mapping system or processing method. The raster data file is included in "BackscatterB_7125_OffshoreFortRoss.zip", which is accessible from http://pubs.usgs.gov/ds/781/OffshoreFortRoss/data_catalog_OffshoreFortRoss.html. The acoustic-backscatter map of the Offshore of Fort Ross map area, California, was generated from backscatter data collected by California State University, Monterey Bay (CSUMB) and by Fugro Pelagos. Mapping was completed between 2007 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 468-kHz SEA SWATHPlus interferometric system. These mapping missions combined to collect backscatter data from about the 10-m isobath to beyond the 3-nautical-mile limit of California State Waters. Within the acoustic-backscatter imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and composition. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones). These data are not intended for navigational purposes.
Description: This part of DS 781 presents data for the acoustic-backscatter map of the Offshore of Fort Ross map area, California. Backscatter data are provided as separate grids depending on mapping system or processing method. The raster data file is included in "BackscatterC_Swath_OffshoreFortRoss.zip", which is accessible from http://pubs.usgs.gov/ds/781/OffshoreFortRoss/data_catalog_OffshoreFortRoss.html. The acoustic-backscatter map of the Offshore of Fort Ross map area, California, was generated from backscatter data collected by California State University, Monterey Bay (CSUMB) and by Fugro Pelagos. Mapping was completed between 2007 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 468-kHz SEA SWATHPlus interferometric system. These mapping missions combined to collect backscatter data from about the 10-m isobath to beyond the 3-nautical-mile limit of California State Waters. Within the acoustic-backscatter imagery, brighter tones indicate higher backscatter intensity, and darker tones indicate lower backscatter intensity. The intensity represents a complex interaction between the acoustic pulse and the seafloor, as well as characteristics within the shallow subsurface, providing a general indication of seafloor texture and composition. Backscatter intensity depends on the acoustic source level; the frequency used to image the seafloor; the grazing angle; the composition and character of the seafloor, including grain size, water content, bulk density, and seafloor roughness; and some biological cover. Harder and rougher bottom types such as rocky outcrops or coarse sediment typically return stronger intensities (high backscatter, lighter tones), whereas softer bottom types such as fine sediment return weaker intensities (low backscatter, darker tones). These data are not intended for navigational purposes.
Description: This part of DS 781 presents data for the bathymetry and shaded-relief maps of the Offshore of Fort Ross map area, California. Raster data file is included in "Bathymetry_OffshoreFortRoss.zip," which is accessible from http://pubs.usgs.gov/ds/781/OffshoreFortRoss/data_catalog_OffshoreFortRoss.html. The bathymetry and shaded-relief maps of the Offshore of Fort Ross Map Area, California, were generated from bathymetry data collected by California State University, Monterey Bay (CSUMB), and by Fugro Pelagos. Mapping was completed between 2007 and 2010, using a combination of 200-kHz and 400-kHz Reson 7125, and 244-kHz Reson 8101 multibeam echosounders, as well as 468-kHz SEA SWATHPlus interferometric system. These mapping missions combined to collect bathymetry from about the 10-m isobath to beyond the 3-nautical-mile limit of California's State Waters. These data are not intended for navigational purposes.